SOLAREZ UV CURE RESIN - 60 ML

Low odour, cures in seconds, guaranteed tack-free when cured with Solarez's UV light systems Cures “Bone Dry” to a clear, hard, glossy finish in under 10 seconds. No mixing necessary. No tacky finish that needs to be wiped off with alcohol like other products. Non-yellowing. Ultra-low viscosity. UV-Cure. Glossy, hard finish. Comes in 0.5 Fl. Oz. bottle with applicator brush. This is a 0.5 oz bottle (14 grams), compare to other products offering 4 grams of actual product. Usage tip: Apply in shade. Irradiate with intense UV light for ONE SECOND. Wait 15 seconds. Irradiate again for one second. Wait. Complete with 10 full seconds UV light. This technique will reduce heat & shrinkage.

Solarez UV Cure Resin - Low odour, cures in seconds, guaranteed tack-free when cured with Solarez UV light systems. Thin – Hard Formula: is approximately the same viscosity as 30 wt. motor oil. It is easy to apply a thin, shellac-like clear coat that will cure in seconds when irradiated with sunlight or our UV flashlight. This product is a very durable aliphatic urethane which characteristically does not yellow with age. Thick – Hard Formula Hard, very viscous for making thick coatings or spheres – bodies, heads, eyes Build fly fishing heads and bodies Viscous formula, easier to work with Medium – Viscosity Formula Medium, This Medium-Viscosity formula is wonderful for coating bodies and creating a deep protective gloss. Build fly fishing heads and bodies Viscous formula, easier to work with FLEX Formula Flexible finish for swimmers, flex parts – could be used as a wader repair Great for coating knots for strength Viscous formula, easier to work with Usage tip: Apply in shade. Irradiate with intense UV light for FIVE SECONDS. Wait 15 seconds. Irradiate again for FIVE SECONDS. Wait. Do this a few cycles. Complete with 2 minutes continuous UV light. This technique will reduce heat & shrinkage....

The "ULTRA-THIN" BONE-DRY PLUS formula is an outstanding performer but it has one quirk: it crystallizes with prolonged exposure to temperatures below 45°F. This probably will not occur at your location but it might occur in shipping along the way to your place. If this does occur, it will look like the resin has gone clumpy, like crystallized honey. The remedy; same as honey, pop the entire bottle into a microwave oven and nuke it for about 10 seconds. Depending on your microwave, it might take two or three sessions to bring it back to its liquid state again. It might need to get to a temperature of 125°F - right about where the bottle feels hot but not too hot to hold. Once this has been achieved, the resin is perfectly good again and can be used and it will stay like this for years. If the resin is exposed again to a temperature of under 45°F for a few hours, it will crystallize again. The same remedy will fix it. Lowest odor formula. No tacky finish that needs to be wiped off with alcohol like other products. Non-yellowing. Ultra-low viscosity. UV-Cure. Glossy, hard finish. 0.5 oz. fl

Fly-Tie Thin-Hard Formula Low Viscosity, flattens out nicely Cures bone dry in <10 seconds with Solarez flashlight Very tough, hard, resilient, high-gloss finish UV Stable Low odor, Non-yellowing non-flammable, non-hazmat shipping A "must" for the fly tie toolbox Fly-Tie Thick-Hard Formula High Viscosity, like refrigerator-cold corn syrup Cures bone dry in <10 seconds with Solarez flashlight Very tough, hard, resilient, HIGH-GLOSS finish UV Stable, non-yellowing Very low odor Non-flammable, non-hazmat shipping Great for building bodies, making spheres, and adding mass Fly-Tie FLEX Formula Wets fibers & filaments to toughen Good on swimmers Clear Low odor Non-flammable

All three of Solarez's fly-tie UV resins. Each comes in a 5-gram tube (1/10 oz) with an applicator tip - ample for many lures. Contains one tube each of: Thin, Hard Formula: Super-hard scratch-resistant finish, Ideal for thin coats on fishing lure heads. Thin formula, easy to coat or saturate. Thick, Hard Formula: Hard, very viscous for making thick coatings or spheres - bodies, heads, eyes. Build fly fishing heads and bodies. Viscous formula, easier to work with. F-l-e-x Formula: Flexible finish for swimmers, flex parts - could be used as a wader repair. Great for coating knots for strength. Viscous formula, easier to work with. All three instantly cure with a hard, tack-free finish with sunlight or our Solarez UV flashlights. Usage tip: Apply in shade. Irradiate with intense UV light for ONE SECOND. Wait 15 seconds. Irradiate again for one second. Wait. Complete with 30 full seconds UV light. This technique will reduce heat & shrinkage.

Solarez UV-cure fly-tie resin Pro Roadie kit All three of our Solarez fly-tie UV resins; Thin-Hard, Thick-Hard, & FLEX formulas. Each comes in a 0.5 oz bottle with cone-cap, and 8 different style applicators – ample resin for many lures. Also included is a UV-Cure High Output flashlight with optimal wavelength. Contains: Thin-Hard 0.5oz x 1   Thick-Hard 0.5oz x 1   Flex Formula 0.5oz x 1   Specs Cures In Seconds 0.5oz Bottles Tack Free 8 Precision Tips High Output 5W 385nm LED Flashlight Eco-Friendly Made in the USA

All three of Solarez's fly-tie UV resins; Thin-Hard, Thick-Hard, & FLEX formulas. Each comes in a 5-gram tube (1/10 oz) with applicator tip - ample for many lures. Also included is a UV Very High Output flashlight with optimal wavelength. (this flashlight takes one "AA" battery, not included.) Usage tip: Apply in shade. Irradiate with intense UV light for ONE SECOND. Wait 15 seconds. Irradiate again for one second. Wait. Complete with 30 full seconds UV light. This technique will reduce heat & shrinkage.